What it does
The version 1.0 scope: eleven planar, single-degree-of-freedom mechanisms, the validation report, and how the output is built.
In development
A class, not a count
Version 1.0 is defined by a class: planar mechanisms with one degree of freedom that can be sized in closed form. Eleven mechanisms fall inside it. A request outside the class is out of scope, not queued.
The eleven mechanisms of version 1.0
Geneva drive
PrototypeTurns continuous rotation into intermittent indexing. The driver pin enters a slot, advances the wheel one step and leaves; the locking disc holds the wheel still for the rest of the turn.
Inputs: number of slots n · centre distance a
Prototype status: parts and a mated assembly are generated in SOLIDWORKS 2022. In 19 of 21 test positions the assembled motion matches the theory exactly; the remaining two are still being investigated.
Four-bar linkage
PlannedThe parent of planar linkages: four links, four revolute joints, classified as crank-rocker, double-crank or double-rocker. You give the four lengths; the add-in does not search for lengths that produce a motion.
Inputs: four link lengths
Crank-slider
PlannedTurns rotation into straight-line motion, the core of every piston engine: a four-bar linkage with one joint replaced by a slide.
Inputs: crank radius r · rod length ℓ · offset
Scotch yoke
PlannedThe crank pin slides in a slotted yoke, so the output motion is exactly sinusoidal. Used in vibration tables and pumps.
Inputs: crank radius r
Quick-return (crank-shaper)
PlannedA slow working stroke and a fast return, as in shaping and broaching machines. The time ratio is a design input.
Inputs: time ratio · stroke
Toggle clamp
PlannedAs two links approach a straight line, the output force rises steeply. Clamping fixtures and press locks work this way; here the dead point is the working principle, not a defect.
Inputs: force ratio · stroke
Straight-line linkages
PlannedChebyshev, Watt and Roberts linkages: approximate straight-line motion without a slide. One item on the list, three linkages.
Inputs: link ratios · stroke
Pantograph
PlannedA parallelogram linkage that scales the motion of one point by a fixed ratio, as in engraving and copying machines.
Inputs: scale factor k
Ratchet
PlannedAn asymmetric toothed wheel and a pawl: motion passes in one direction and locks in the other, as in hoists and ratchet wrenches.
Inputs: number of teeth · tooth profile
Oldham coupling
PlannedConnects two parallel shafts with offset axes without changing the speed ratio. The middle disc slides on two perpendicular tongues.
Inputs: shaft offset e · disc diameter
Long-dwell linkage
PlannedA six-bar linkage whose output rests for a long part of the crank's turn, then swings: a point on a four-bar's coupler traces a near-circular arc, and a dyad sized to that arc holds the output still. Dwell without a cam, as in packaging machines. You give the lengths; the add-in does not search for lengths that produce a dwell.
Inputs: four-bar lengths · coupler point · dyad lengths
Compared with SOLIDWORKS
What SOLIDWORKS already does, what we add, and what only this add-in does. Where SOLIDWORKS can do it too, we say so.
| Feature | Compared with SOLIDWORKS |
|---|---|
| Whole mechanism from your dimensions | Goes beyond SOLIDWORKS SOLIDWORKS Toolbox (Professional and Premium) inserts standard parts such as gears, cams and sprockets; its list has no linkages or indexing drives. Mechanism Expert is designed to build every part and the mated assembly for eleven planar mechanism types. The preview build available today builds no mechanism yet; the Geneva drive, the first type, is in internal testing. Source: SOLIDWORKS 2027 · Professional |
| Hinge and slot mates | Also in SOLIDWORKS These are SOLIDWORKS' own mechanical mates, in every package. The add-in is designed to add them for you, on reference geometry it creates, so the assembly keeps its mates when a dimension changes and opens without the add-in. Source: SOLIDWORKS 2027 · Standard |
| Velocity and acceleration | Also in SOLIDWORKS SOLIDWORKS Motion Analysis (the SOLIDWORKS Motion add-in, with SOLIDWORKS Premium) simulates the motion and plots velocity and acceleration. The validation report is planned to give them in closed form for the eleven types, with any SOLIDWORKS package, next to the dimension each depends on. Source: SOLIDWORKS 2027 · Premium |
| Jerk | Goes beyond SOLIDWORKS SOLIDWORKS Motion Analysis plots displacement, velocity and acceleration; jerk is not one of its result categories. The report is planned to state jerk as well, and to say plainly where it is unbounded, as it is in every Geneva drive. Source: SOLIDWORKS 2027 · Premium |
| Transmission angle, dead points, Grashof class | Goes beyond SOLIDWORKS In SOLIDWORKS Motion Analysis you can plot an angle between points you pick and judge it yourself. The report is planned to name the Grashof class, give the minimum and maximum transmission angle and where they occur, list the dead points, and tie each finding to the dimension it depends on. Source: SOLIDWORKS 2027 · Premium |
| Collision check | Also in SOLIDWORKS SOLIDWORKS answers this: Interference Detection is part of every package. The add-in does not estimate interference; the report is planned to run the SOLIDWORKS check and show its result. Source: SOLIDWORKS 2027 · Standard |
The validation report
Generating a model is the easy part. The report is planned to come with every generated mechanism and to say what the model does:
- Grashof class, where it applies: crank-rocker, double-crank or double-rocker
- Transmission angle: minimum and maximum, and where in the cycle they occur
- Dead points
- Range of motion
- Link collisions, decided by SOLIDWORKS and never estimated by the add-in
- Velocity, acceleration and jerk
- For every finding, the dimension it depends on
What it builds
Each parameter set is generated from scratch. Changing a parameter such as the number of slots changes the shape itself, so a template with edited numbers would silently break its own mates.
Mates attach to named reference geometry created during generation, so they are designed to survive parameter changes.
The output is plain solid bodies with a feature tree and no macro features, so the assembly is designed to open on a computer without the add-in.